19
12.5 Tooth form
Figure 32 shows common blade forms. Tooth form
has an effect on cutting rate.
Regular: Standard blade form with evenly spaced
teeth and zero-degree rake angle. Offers clean cuts
at slower feed rates.
Skip Tooth: More space between teeth, for good
chip removal and fast cuts.
Double Tooth: A skip tooth with larger gaps
between tooth sets; good chip removal, fast cutting.
Reverse Tooth: Prevents underside tear-out,
leaves clean edge.
Spiral: Cuts on all sides without turning workpiece;
limited applications but good for looser fretwork.
Crown Tooth: Cuts on both up and down strokes
for clean, splinter-free edges. Depending on blade
oscillation settings, a crown tooth blade may often
be turned over for a fresh set of cutting teeth.
Figure 32: blade forms
13.0 Optional accessories
These accessory items, purchased separately, can enhance the functionality of your scroll saw. Contact your
dealer to order, or call JET at the phone number on the cover.
727200S – Steel stand for JWSS-22B 727201 – Lower Blade Holder (set of 3)
To Next Page
Loading...
Need help?
General
