Jet JBG Series User Manual

5
3.0 Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for the JET
JBG Series Bench Grinders. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide consistent, long-term operation if used in accordance with instructions set
forth in this manual. If there are any questions or comments, please contact either your local supplier or
JET. JET can also be reached at our web site: www.jettools.com.
4.0 Specifications
Model .................................................................... JBG-6B ......................... JBG-8B ....................... JBG-10B
Stock Number ....................................................... 577101 .......................... 577102 .......................... 577103
Overall Dimension (L x H x D/in) ......... 18 x 10-1/2 x 8-1/2 ............ 19 x 12-1/2 x 10 ...... 24-1/2 x 12-1/4 x 13
Wheel Size (D x W x Bore /in) ...................... 6 x 3/4 x 1/2 ..................... 8 x 1 x 5/8 ...................... 10 x 1 x 1
Wheels Included/Grit ............................................ 60 & 36 .......................... 60 & 36 .......................... 46 & 24
Motor ................................................ 5.0 Amp, 115V, 1PH ..... 8.0 Amp, 120V, 1PH ... 10.0 Amp, 120V, 1PH
Motor Output .......................................................... 1/4 HP ........................... 1/2 HP .............................. 1 HP
Input Power Required .......................... 370W, 115V, 1PH ......... 746W, 120V, 1PH ....... 1100W, 120V, 1PH
Motor RPM ............................................................... 3,450 ............................. 3,450 ............................. 1,750
Gross Weight (lbs.) ....................................................... 38 .................................. 60 ................................ 119
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury

Jet JBG Series Specifications

General

Brand	Jet
Model	JBG Series
Category	Grinder
Language	English