4
3.0 Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for the JET JLP-A
Series Lever Hoists/Pullers. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This tool has been designed and
constructed to provide consistent, long-term operation if used in accordance with instructions set forth in this
manual.
The JLP-A Series hoists are all steel construction with a powder coat finish, and have a completely enclosed
Weston-type automatic brake system.
The JLP-A series hoists are proof-tested and comply with OSHA, ANSI/ASME B30.21 and HST-3
standards.
If there are any questions or comments, please contact either your local supplier or JET. JET can also be
reached at our web site: www.jettools.com.
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
Register your product using the mail-in card provided, or register online:
http://www.jettools.com/us/en/service-and-support/product-registration/
To Next Page
Loading...
