To Next PageTo Next Page
Need help?Do you have a question about the Jet FA Series and is the answer not in the manual?
General| Protection Class | IP54 |
|---|---|
| Load Capacity | 250kg - 5000kg |
| Chain Material | Alloy Steel |
| Lifting Capacity | 250kg - 5000kg |
| Lifting Height | 3 to 30 meters |
| Chain Falls | 1 or 2 |
| Frequency | 50 Hz |
Procedure for claiming warranty for JET products against defects in material and workmanship.
Identifies and illustrates the various components of the electric hoist unit.
Key precautions to consider before and during the installation of the hoist.
Steps for setting power, connecting wiring, and ensuring correct voltage and grounding.
Guidelines for correctly mounting and using the chain bucket for proper hoist operation.
Critical safety and operational rules for using the electric chain hoist.
Recommended practices for safe and efficient operation of the hoist.
Guidelines for checking lifting slings and performing safe load lifting operations.
Daily checks of hooks, parts, chain, and switches before hoist operation.
Periodic inspection of hoist components, including load chain pitch, diameter, and hook condition.
Monthly checks for loose parts, worn components, and electrical system condition.
Annual inspection of the hoist's range of movement and overall operation with rated load.
Wiring diagram for the 3-phase, single voltage, single speed 575V model.
Wiring diagram for the 3-phase, dual voltage, single speed model.
Wiring diagram for the 3-phase, single voltage, dual speed 575V model.
Wiring diagram for the 3-phase, single voltage, dual speed 220V-440V model.
Wiring diagram for the 1-phase model, including motor and capacitor connections.
Comprehensive list of 'DO' and 'DO NOT' instructions to prevent injury during hoist operation.
