To Next Page

To Previous Page

1. INSTALLATION

1.1 DESIGNATION OF ELEMENTS OF THE UNIT (fig 1) (example with electric trolley)

1.2 PRECAUTIONS THAT MUST BE CONSIDERED WHEN INSTALLING

1.2.1. USE OF YOUR HOIST UNDER SPECIFIC CONDITIONS

• Your hoist should not be used in an environment that is exposed to a possible danger of explosion.(Area where organic

solvents or explosive dusts exist.)

• The electric chain hoist may not be used in areas where extremely low or high temperatures, high humidity, or chemicals

predominate. Consult your local JET distributor when the electric chain hoist is used in a special environment such as HIGH

TEMPERATURE (hotter than 104° F or 40° C) LOW TEMPERATURE (colder than 0° F or -18° C), HIGH HUMIDITY (more than

90%) or CHEMICAL EFFECTS.

1.2.2. THE SUPPORTING STRUCTURE SHOULD HAVE A LOAD RATING AT LEAST EQUAL TO THE HOIST

Figure 1

Questions and Answers:

Need help?

Do you have a question about the Jet FA Series and is the answer not in the manual?

Jet FA Series Specifications

General