Jetson GEN 1 User Manual

9
TURNING LIGHTS ON AND OFF
To turn the Headlight and Taillight on, ip the switch on the right handlebar
to the left. One click to the left turns on the Headlight and Taillight. Two clicks
to the left turns on the Headlight, the Taillight, and the High Beam. There are
two functions for the High Beam. The High Beam switch is located on the
Left Handlebar. Flipping the High Beam Switch up will raise the High Beam.
Flipping the High Beam Switch down will lower the High Beam.
To turn your Gen 1 off, make sure it is not in motion, then turn the key counter
clockwise. Once the key is removed from the Ignition, unlock the Seat Cask and
turn the battery switch to Off.
Turning the
Gen 1 Off
High Beam
Function
Switch
Headlight,
Taillight, and
High Beam
On/ Off
Switch

Jetson GEN 1 Specifications

General

Brand	Jetson
Model	GEN 1
Category	Scooter
Language	English