Jetson JALPHA-BLK

12
1.1 Attaching the Seat
BOLT A
WASHER B
• TURN SEAT ON ITS SIDE AND ALIGN FRAME TO MATCH
BOLT HOLES.
• PLACE WASHER B ONTO BOLT A AND THREAD BOLT
INTO THE HOLE UNTIL FAIRLY TIGHT.
• REPEAT USING REMAINING 3 BOLTS AND WASHERS.
• TIGHTEN WITH PROVIDED WRENCH.
NOTE: BE CAREFUL NOT TO OVERTIGHTEN THE BOLTS.
DOING SO MAY CAUSE THE SEAT TO CRACK.
1. Get Started