• LEVEL THE SEAT AND HOVERBOARD BEFORE CONNECTING THE SEAT WIRE TO THE HOVERBOARD'S CHARGING PORT.
• MAKE SURE SIDE OF HOVERBOARD WITH CHARGING PORT IS FACING OUT.
• CONNECT THE REAR SEAT WIRE TO THE HOVERBOARD’S CHARGING PORT.
• POWER ON THE HOVERBOARD THE LIGHTS WILL TURN ON ONCE THE HOVERBOARD AND THE SEAT WIRE ARE PLUGGED IN.
• THE DEFAULT LIGHTING MODE WILL DISPLAY WHEN THE ALPHA L AND HOVERBOARD ARE BOTH CONNECTED AND
POWERED ON.
• SHORT PRESS THE POWER BUTTON TO SWITCH BETWEEN DIFFERENT LIGHTING EFFECTS.
PLEASE NOTE: THE CONNECTOR SHOULD ALWAYS BE CONNECTED WHILE RIDING.
1.12 Turning the Lights On
REAR SEAT WIRE
CHARGING PORT
To Next Page
Loading...
