Jetson JRYDER-GRY User Manual

17
3. ROTATE THE HANDLEBAR FORWARD OR BACKWARDS AS NECESSARY UNTIL THE HANDBRAKES ARE AT THE DESIRED HEIGHT.
4. CLOSE THE CLAMP LATCH AND TIGHTEN THE BOLT UNTIL THE HANDLEBAR IS SECURE.
IMPORTANT:
• BE MINDFUL OF THE ELECTRICAL COMPONENTS ON THE HANDLEBAR WHEN ROTATING. DO NOT OVERROTATE AND
PULL THE WIRING OUT FROM THE HANDLEBAR STEM.
• DO NOT OVERTIGHTEN THE BOLT ON THE HANDLEBAR CLAMP. OVERTIGHTENING CAN PREVENT THE CLAMP
LEVER FROM OPENING AND CLOSING EASILY.

Jetson JRYDER-GRY Specifications

General

Brand	Jetson
Model	JRYDER-GRY
Category	Scooter
Language	English