Jetson JRYDER-GRY

25
1.7 Inlating the Tires
1. REMOVE THE VALVE DUST CAP FROM THE TIRE
VALVE ON EACH WHEEL.
2. CONNECT AN AIR PUMP TO THE VALVE AND
PUMP AIR INTO EACH TIRE IN ACCORDANCE WITH
THE DIRECTIONS OF YOUR AIR PUMP.
3. USE A GAUGE TO MONITOR TIRE PRESSURE, AND
STOP INFLATING WHEN THE TIRE HAS REACHED A
PRESSURE BETWEEN 35 AND 45 PSI.
4. REPLACE THE VALVE DUST CAPS ON BOTH WHEELS.
VALVE DUST CAP