Jetson Relay User Manual

11
BOLT
CLAMP
• POSITION THE HANDLEBAR ON THE TOP OF THE
STEM SO THAT THE PREDRILLED HOLE IN THE
HANDLEBAR ALIGNS WITH THE HOLE IN THE STEM.
• PLACE CLAMP OVER HANDLEBAR SO THAT THE
HOLE IN THE CLAMP ALIGNS WITH THE HOLE IN
THE HANDLEBAR.
• INSERT THE BOLT THROUGH THE HOLES.
• TIGHTEN THE BOLT USING THE ALLEN KEY UNTIL
THE HANDLEBAR IS SECURE.

Jetson Relay Specifications

General

Brand	Jetson
Model	Relay
Category	Scooter
Language	English