Jetson Relay - Handlebar Controls and Modes

18
2.3 Using the Functions on the Handlebar
EBRAKE:
• USE THE EBRAKE LIKE THE REAR FOOT BRAKE:
TO SLOW DOWN OR STOP.
• PRESS DOWN ON THE EBRAKE SLOWLY TO
AVOID STOPPING ABRUPTLY OR
LOSING CONTROL.
THUMB THROTTLE:
• USE YOUR REAR FOOT TO KICKSTART THE
SCOOTER. THEN PRESS DOWN ON THE
THROTTLE TO ACCELERATE.
• PRESS GENTLY ON THE THROTTLE TO AVOID
SUDDEN BURSTS OF SPEED.
3 SPEED MODES:
• LONGPRESS POWER BUTTON ONCE TO TURN ONOFF.
• SHORTPRESS SPEED MODE BUTTON ONCE TO
SWITCH BETWEEN MODES.
• E, N, OR S WILL DISPLAY ON THE LCD SCREEN TO
INDICATE WHICH MODE THE SCOOTER IS SET IN.
• E MODE  MAX SPEED 5 MPH
• N MODE  MAX SPEED 8 MPH
• S MODE  MAX SPEED 10 MPH
THUMB THROTTLE
LCD SCREEN
POWER BUTTON
SPEED MODE BUTTON
EBRAKE