2. Getting Started
1. PULL OPEN THE CHARGING PORT COVER.
2. PLUG THE CHARGER INTO THE WALL, AND THEN PLUG THE CHARGER CORD INTO THE BOARD'S CHARGING PORT.
3. WHEN THE INDICATOR LIGHT ON THE CHARGER CHANGES FROM RED TO GREEN, THE BATTERY HAS REACHED FULL CHARGE.
REMOVE THE CHARGER CORD FROM THE CHARGING PORT, AND THEN UNPLUG THE CHARGER FROM THE POWER OUTLET.
4. CLOSE THE CHARGING PORT COVER.
2.1 Charging the Battery
- CHARGING
- CHARGING COMPLETE
CHARGER INDICATOR LIGHT ON THE CHARGER:
CHARGING INDICATOR LIGHT
CHARGER CORD
CHARGER
CHARGING PORT WITH COVER
IMPORTANT: THE RING CAN ONLY BE CHARGED IN THE FOLDED POSITION.
To Next Page
Loading...