Jetson RING - Powering on & off

14
THE BOARD POWERS ON WHEN IT IS UNFOLDED FOR RIDING, AND POWERS OFF WHEN IT IS FOLDED FOR STORAGE AND
TRANSPORT.
TO UNFOLD AND POWER ON:
1. PLACE THE RING ON YOUR RIDING SURFACE.
2. GENTLY PULL APART THE STANDING PLATFORMS.
3. LOWER THE PLATFORMS DOWN UNTIL THEY ARE HORIZONTAL AND YOU HEAR A SERIES OF BEEPS.
TO FOLD AND POWER OFF: LIFT THE EDGES OF THE STANDING PLATFORMS AND GENTLY PUSH THEM TOGETHER OVER THE WHEEL.
IMPORTANT: NEVER POWER ON YOUR BOARD BEFORE PLACING IT ON YOUR RIDING SURFACE.
2.2 Powering On & O
UNFOLDED
FRONT STANDING
PLATFORM
BACK STANDING
PLATFORM
FOLDED