JETStream JMC-1105 - Assembly Steps; Step 1: Stabilizer Attachment; Step 2: Pedal Attachment

IMPORTANT : READ ALL STEPS BEFORE ATTACHING PEDALS.
STEP 1.
Attach both stabilizers (02,03) to main frame (01). Fix with bolts (04), arc washers (05) & domed
nuts (06).
STEP 2.
a. Attach pedal (22R & 22L) to pedal cranks. (pedal marked "L" and "R" indicates left
and right side of bike, make sure not to mix up)
b. Left pedal has left-hand thread and must be turned counterclockwise (ccw) to
assemble, right pedal has right-hand thread and must be turned clockwise (cw) to
assemble.
2
4
5
6
1
3
6
5
4
22L
22R
- 3 -