Need help?Do you have a question about the Jetta Water Dance Baths and is the answer not in the manual?
Inspect unit for freight damage and contact JETTA immediately if issues are found.
Water test the unit before installation, checking all fittings for leaks and repairing them.
Test fit the tub, prepare bedding compound, ensure even support, and level the unit.
Details operation of the 4-button control for blower, light, speed, and session timer functions.
Explains the meaning of various LED indicators on the air bath control panel.
Describes the system's purge cycle for drying the air delivery system and maintaining sanitation.
Outlines error codes indicated by LED patterns and how to interpret them for troubleshooting.
Guides on operating Harmony and Sanctuary Falls baths, including jet adjustment and removal.
Provides steps for cleaning the bath, including recommended cleaners and flushing procedures.
Addresses issues with blocked or closed jets and checks for debris in the suction.
Covers pump not starting, water leaks around the pump, and motor humming or not pushing water.
Troubleshoots problems with the trissage function and the bath light not coming on.
Instructions for changing a defective bulb and general tub cleaning guidelines.
Details coverage for structure, surface, and equipment, including residential vs. commercial terms.
Outlines limitations, exclusions, and specific conditions that void the warranty.
Provides information on how to claim warranty service and contact details for Jetta Corporation.
To Next Page
General