To Next PageTo Next Page
Need help?Do you have a question about the JideTech P2R-20X and is the answer not in the manual?
Connects the mobile device to the camera's Wi-Fi hotspot for initial setup.
Guides users through the process of adding a camera to the 'CamHipro' mobile application.
Details steps to connect the camera to a standard Wi-Fi network via the APP.
Instructions for connecting the camera by scanning a QR code using the mobile app.
Method for connecting the camera by discovering it on the local network.
Provides an overview of the various functions available within the mobile application.
Explains how to locate the IP camera on a computer using search software.
Instructions for accessing and viewing camera feeds directly through a web browser.
Describes the key elements and layout of the computer interface.
Covers how to access and configure various camera parameters via the computer interface.
Guide for installing the dedicated video management software on a PC.
Steps involved in adding cameras to the P2P client software.
General| Model | P2R-20X |
|---|---|
| Category | IP Camera |
| Night Vision | Yes |
| Video Compression | H.265/H.264 |
| Ingress Protection | IP66 |
| Weatherproof | Yes |
| Motion Detection | Yes |
| Audio | Two-way Audio |
| Resolution | 1920x1080 |
| Power Supply | DC 12V |
| Operating Temperature | -20°C to 60°C |
| Storage | MicroSD card (up to 128GB) |
| Network | Ethernet (RJ45) |
| Protocol | ONVIF |
| Mobile Support | iOS, Android |
| Alarm | Yes |
| Lens | 4.7-94mm Motorized Lens |
