JIGOO T600 - Product Overview and Operation; Product Introduction; Instructions for Use

• In order to avoid injury, the UV lamp must be within 3cm of the
irradiated object and the inclination angle of the machine should
not exceed 30°. Outside of this range, the UV lamp will
automatically turn off;
• To avoid injury, do not look directly into the UV ray.
· To safely check that the UV lamp is working properly, hold the
machine up within a distance of 5cm from the irradiated object
and see if there is a UV light spot on the object. Do not look
directly at the UV lamp.
• It is normal that some odors are discharged from the air outlet of
the Smart Mite Cleaner when it is used for the first time.They will
not harm human health and will naturally disappear later;
• The high-speed airflow sound generated by the Smart Mite
Cleaner is normal.
Cleaning frequency
At first, it is recommended to use the Smart Mite Cleaner 2-3
times a week; later, it is recommended to use once a week.
Note:
· When the machine is not used for a long time, please take the
aroma capsule out of the container and place the machine in a
cool and dry place, away from direct sunlight and moisture.
• When it is used for the first time, there will be more garbage;
with use, the garbage will reduce accordingly.
• After use, clean the dust barrel assembly.
Preface Product Introduction
Contents
Instructions for Use
Dear customer:
Thank you for using the JIGOO Mite Cleaner.
The content in the manual is for reference in
use and maintenance. For matters not
covered, please consult our customer service.
Packing List
Names of Parts
Main unit Cyclone component
Main unit
• Put the Smart Mite Cleaner on the bed, connect
to the power supply, press the power switch and
gently push it back and forth to clean.
Tips:
• There is no need to lift up or hold down the Mite Cleaner
forcefully; simply put it on the bed and push it back and forth;
Product Introduction .....................................................02
Instructions for Use .........................................................02
Maintenance ........................................................................03
Troubleshooting ................................................................04
Specifications ......................................................................04
Note ............................................................................................04
Environment ........................................................................05
Compliance Statements ..............................................05
EN
02
Mite Cleaner x 1 User Manual x 1
Filter Sponge x 1 Cleaning Brush x 1
Aroma Capsule x 2
Function panel
3
2
1
5
4
7
9
6
8
9 10 11
5
7
1
2
4
6
8
3
1. Roller brush window
2. Aroma container
3. Dust cup
4. Dust cup release button
5. Cyclone cup
6. Display
7. Speed button
8. Power switch
9. Filter
10. Filter sponge
11. Support of filter sponge
1. Speed mode
2. Dust mite digital display
3. Function
4. Ultrasonic generator
5. UV lamp
6. Heating outlet
7. Bottom plate lock
8. Roller brush
9. Bottom plate