Jimmy BX7 - Maintenance and Storage

6
Note:
1.For safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.
2.Do not use water to clean the brushroll to avoid water entering the bearings and causing bearing rust..
3.Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer thinner will cause crack or
colour fading and cannot be used.
Maintenance and storage
Please clean dust cup and lter after each use for further use. It is recommended to replace a
lter after 30-50 hours of working time(depending on specic situation) for better use.
Any paper, lead glass, plastic will greatly affect the effect of UV light. Dust or stain on UV light
cover will affect the effect of UV light. Please wipe and clean the UV light cover regularly for
better use.
Do not touch the UV light cover as dirt will affect UV light effect.
Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct
sunlight or humid environment.