Jimmy JV83 - Main-Body Assembly

3
Main-body Assembly
Packing List
Hold the floor head with left hand, use right hand
to insert the metal tube vertically into floor head,
align with the conductive needle, press the handle
until a “click” sound is heard.(Picture 1)
Fix the charging base on wall through screw holes,
so that the handheld vacuum cleaner can be
placed.(Picture 2)
Battery pack assembly: use one hand to hold
handheld vacuum cleaner, one hand to hold
battery pack, align with the guide-track groove,
then install the battery pack until the “click” sound
is heard. Pull hard the battery pack downwards, if
the batter pack remain tight, which means battery
pack assembly complete.(Picture3)
Connect the electric floor head with metal tube
Charging base assembly
Assemble battery pack and handheld vacuum
Cleaner
Part Name
Handheld Vacuum
Cleaner
Electric Floor
Head
Electric Mattress
Head
2-in-1
Upholstery
Tool
2-in-1 crevice tool
Quantity 1 1 1 1 1
Part Name Metal Tube Adaptor Battery Pack Soft Brush Connectorl
Quantity 1 1 1 1 1
Part Name Strench Hose Charging Base Instruction Manual Screws Expansion Hos
Quantity 1 1 1 2 2
Note: Keep the handle and floor head in the same
direction, conductive needle shall align with the socket.
Note: Please disassemble the battery pack from the
machine when the vacuum cleaner is not used for a long
time.Pack the machine and store in dry place, avoiding
direct sunlight or humid environment.
Conductive
Needle
Electric Floor
Head
Metal Tube
Screw Hole
Charging base
1.
2.
3.
groove
Guide-track groove
Battery pack