JingYan TLL90S User Manual

2022 Aug 15
5
Press and hold for 3 seconds to enter MENU
mode, for set mode options.
Serves as the Set
key.
Any angle measurement start button. Refer to
section “Any Angle”
Press and hold for 3 seconds to enter MENU
mode, for set mode options.
Serves as the Set
key.
LCD Icons Representations
Battery status indication icons
These icons indicate the battery level. There are 3
levels representing empty, half and full.
In dual-axis mode, the LCD displays the direction of tilt
graphically. It will show as E bubble to display the
direction of tilt
Degree mode. Flash when unit is in HOLD mode
mm/M, the height of one end for 1m long plate.
Gradient % mode. Flash when unit is in HOLD mode

JingYan TLL90S Specifications

General

Brand	JingYan
Model	TLL90S
Category	Measuring Instruments
Language	English