the JioExtender6 controller.
5. Once the pairing is successful you can disconnect the LAN cable and
place JioExtender6 at your desired location to extend the Wi-Fi coverage.
Please note, when you disconnect the LAN cable, JioExtender6 will
switch to wireless backhaul automatically to remain connected with the
JioExtender6 Controller.
Once the Wi-Fi connection is successfully established, the Status LED will
turn solid green, yellow or red.
●
If Solid green, then link quality is optimal.
●
If Solid yellow, then link quality is fair, but not optimal.
●
If Solid red, then link quality is bad.
Please ensure that the LED indicator of JioExtender6 is solid green in color
all the time. Refer the Guidelines for placement.
5 Guidelines for Placement
● Place the JioExtender6 on a table about three to four feet in height from
the ground. Do not place it in corners.
● Do not place JioExtender6 close to the floor, too high up, very close to the
home ceiling or under low roof conditions.
● Do not place the JioExtender6 in cabinets, closed areas and crammed
places along with other wireless or electrical devices.
● Avoid placing JioExtender6 in between corridors connecting living rooms
and bedrooms.
● Try to maintain line of sight between the JioExtender6 Controller and
the JioExtender6 Agent or minimize obstacles between them.
● Don’t put JioExtender6 beside any metal objects, such as home
appliances, metal doors, etc.
To Next Page
