11
SECTION 1
10
Charging the Battery
To use the AC Power Charger:
1. Plug the large end of the
charger into a standard wall
outlet (120/220 VAC).
2. Plug the smaller end into
the bottom end of your phone.
You’ll see a “Charging”
message in the display window.
3. When the battery is fully
charged, you’ll see a
“Completed” message in the
display window.
Jitterbug accessories are designed
to maximize the battery's life.
Using other accessories could
damage your phone and may void
your warranty.
SECTION 1
Low Battery Indicator
Jitterbug phones do not have a “low
battery” icon. Instead, reminder
warnings will appear as popups on the
screen with the following messages:
º
“Charge Battery” will appear when you
have used about 50% of your battery.
º
“Battery Very Low” will appear when
you have about ten minutes of calling left.
º
“Battery Critical” will appear when you
have two minutes of calling left. The
message will appear every ten seconds
until you connect your phone to a charger.
If you continue to use your phone
without charging the battery, the
phone will turn itself off.
You must fully charge your
battery before using your phone
for the first time. Failure to do so
may damage your battery.
To Next Page
Loading...
Need help?
General
