JJC JM-II Series - Product Features; JM Receiver Specifications; JM Transmitter Specifications

JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and
SLR cameras that have a remote socket on the camera body. The system works at
433MHZ frequency and has 16 available channels. What’s more, this wireless remote
system adopts a technology to allow the transmitter to trigger the receiver without direct
line of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's
accessory shoe, and then just connect the supplied JJC receiver cable to the camera's
remote socket. The receiver is powered by one piece of CR-2 lithium battery while the
transmitter is powered by one piece of 23A battery. JM-II transmitter can trigger the
camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots,
unlimited continuous shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket
on the bottom, so you can even mount the receiver onto a tripod. Most importantly, our
JM-II transmitter is able to fire multiple receivers at the same time. All these features
make it good for eliminating camera shake in long exposure photography.
Package Contains
⚫ JM II transmitter x 1
⚫ JM II receiver x 1
⚫ CR-2 battery x 1
⚫ 23A battery x 1
⚫ Connecting cord x 1
⚫ This manual instruction x 1
Features
JM Receiver:
• Battery type: CR-2 3V lithium battery × 1
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F)
• Net weight : Approx. 19g
• Dimensions: 48 × 38 × 29mm
JM Transmitter:
• Battery type: 23A 12V battery × 1
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F)
• Net weight : Approx. 18g
• Dimensions: 82 × 27 × 14.7mm