4 JKF50 Installation and Operation Guide
4. Push the fridge carefully into the cabinet; using caution to avoid scratching the floor.
5. Mount the fridge within the cabinet wall: remove the blanking covers on the inside
of the refrigerator wall (x4)
6. Drill a hole in each screw holder through the side metal panel and fix into place with
suitable screws (x4, not supplied). Return the blanking covers to cover the screw holes.
7. Prior to switching on: check power supply voltage and operating voltage match and
ensure wiring is protected from heat exposure or sharp objects.
FIXING THE FRIDGE IN PLACE
Installation (continued)
NB: It is highly recommended that the installation of the JKF50 is carried out by an
appropriately qualified person.
To Next Page
Loading...