JLab Audio NEON User Manual

NEON WIRELESS HEADPHONES
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
S
A
T
I
S
F
A
C
T
I
O
N
G
U
A
R
A
N
T
E
E
30
DAY
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
Learn more at jlabaudio.com/guarantee
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
Select “JLab Neon BT” in your device settings
to connect.
When the headphones
are paired, voice prompts
“You are connected”
and blue light will
flash slowly.
Bluetooth
JLab Neon BT
Settings
3
When the Neon Wireless
Headphones are powered
off, press and hold
the Power Button for
approximately 10 seconds.
Fast blinking red and blue
light indicates searching
for Bluetooth device.
2
Turn on the Bluetooth
in your device settings.
Bluetooth
Settings
1
CHARGING
Note: For optimum performance, charge overnight with Micro USB
cable prior to using. Allow about 3 hours to fully charge.
Connect the Micro USB (included) to the headphone and connect
the USB into a computer or AC adaptor (not included). Make sure
the USB connection has a power output source.
Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.
ACCESSORIES
MICRO USB
CABLE
OR

JLab Audio NEON Specifications

General

Type	On-Ear
Driver Size	40 mm
Charging Time	2 Hours
Wireless	Yes
Bluetooth	Yes
Frequency Response	20Hz - 20kHz
Impedance	32 Ohms
Microphone	Yes
Water Resistance	No
Bluetooth Range	30 ft
Bluetooth Version	Bluetooth 5

Summary

First Time Setup: Bluetooth Pairing

Enable Device Bluetooth

Turn on Bluetooth in your device's settings to prepare for connection.

Initiate Headphone Pairing

Press and hold the power button on the headphones until the light blinks red and blue.

Connect to "JLab Neon BT"

Select "JLab Neon BT" from your device's Bluetooth settings to establish a connection.

Charging Your Headphones

Charging Procedure

Connect the Micro USB cable to the headphone and a power source for charging.

Button Functions Overview

Power, Bluetooth, and Call Controls

Functions for powering on/off, Bluetooth pairing, play/pause, and call management.

Volume and Track Navigation

Instructions for adjusting volume levels and skipping tracks forward or backward.

EQ Mode Selection

How to activate and cycle through different sound equalization modes (Signature, Balanced, Bass Boost).

Headphone Warm-Up

Recommended Burn-in Process

Guidance on the burn-in process for optimal audio performance and diaphragm loosening.

Important Cautions

Handling and Environmental Precautions

Warnings about moisture, extreme heat, cold, humidity, and physical damage.

Usage and Discomfort Advice

Recommendations for preventing discomfort and consulting a physician if issues arise.