Need help?Do you have a question about the JLG 800AJ HC3 and is the answer not in the manual?
General| Platform Height | 80 ft |
|---|---|
| Platform Capacity - Restricted | 1, 000 lb |
| Engine Type | Diesel |
| Gradeability - 2WD | 45% |
| Working Height | 86 ft |
| Jib Length | 6 ft |
| Overall Width | 8 ft 2 in |
| Engine Power | 74 hp |
| Outriggers | No |
| Tire Type | Foam-Filled |
| Swing | 360 Degrees Continuous |
| Platform Rotator | 180° |
| Ground Clearance | 1 ft |
| Steering | 2 Wheel |
Indicates an imminently hazardous situation. If not avoided, will result in serious injury or death.
Indicates a potentially hazardous situation. If not avoided, could result in serious injury or death.
Outlines necessary precautions for proper and safe machine usage and maintenance.
Covers pre-operation checks and operator training requirements.
Details safe operation procedures, hazards, and general operational guidelines.
General safety precautions to be observed during machine maintenance.
Importance and requirements of operator training and supervision.
Covers machine inspections and maintenance requirements based on type and frequency.
Lists critical checks to perform before starting the machine.
Details the visual inspection process for the machine's exterior and key systems.
Procedures for verifying proper operation of machine functions.
Identifies and describes controls on the ground control console.
Identifies and explains indicators on the ground control panel.
Identifies and describes controls on the platform control station.
Identifies and explains indicators on the platform control panel.
Details machine capacities and stability factors.
Provides a reach chart for the 800AJ HC3 model.
Information on engine operation, including starting and shutdown procedures.
Precautions and procedures for driving the machine.
Safety warnings and procedures related to boom operation.
Provides load capacity and reach information for lifting.
Procedures for emergency situations like operator incapacitation or caught boom.
Diagram showing lubrication points and procedures.
Lubrication specifications for various components.
To Next Page
