Need help?Do you have a question about the JLG E600J and is the answer not in the manual?
General| Brand | JLG |
|---|---|
| Model | E600J |
| Category | Boom Lifts |
| Language | English |
Outlines precautions for proper and safe machine usage and maintenance.
Covers operator training, knowledge, and pre-operation checks.
Precautions to avoid hazards in the work area before and during operation.
Ensures machine is safe and all safety devices are operating properly.
Details general operational procedures and safety during use.
Safety measures for preventing trips and falls while operating.
Warnings and precautions regarding electrical hazards.
Guidance on preventing tipping due to slopes, surfaces, and load.
Safety measures to prevent crushing and collision injuries.
Provides guidelines for safely towing, lifting, and hauling the machine.
Details general safety precautions during machine maintenance.
Safety precautions for handling batteries and potential hazards.
Ensures operators are properly trained for safe machine operation and maintenance.
Covers procedures for machine preparation, inspection, and maintenance.
Checklist for ensuring the machine is ready for operation before starting.
Procedures for verifying all machine functions operate correctly.
Tests the functionality of the SkyGuard safety system.
General statement on manufacturer's and user's responsibilities.
Details the various controls and indicators on the machine.
Describes controls and operations from the ground control panel.
Describes controls and operations from the platform control panel.
Explains the meaning of various operational status indicators.
Overview of the self-propelled hydraulic lift and its control stations.
Lists key operating parameters and limitations of the machine.
Details power and emergency stop functions, and control selection.
Procedures for driving the machine forward, reverse, and on grades.
How to operate the steering controls.
Procedures for platform level adjustment and rotation.
Procedures for swinging and adjusting the boom.
Details generator operating modes and conditions.
Controls the speed of boom functions and platform rotation.
Overrides function controls for emergency retrieval due to platform overload.
Details the operation and functionality of the SkyGuard system.
Procedure for testing the oscillating axle lockout system.
Steps for safely shutting down and parking the machine.
Instructions for safely lifting and securing the machine for transport.
Procedures for safely towing the machine.
Procedures for disengaging and engaging drive hubs for towing.
Explains steps for emergency situations during operation.
Procedure for notifying JLG Industries of any product incidents.
Procedures for handling emergencies during machine operation.
Provisions for moving the machine in an emergency.
Procedure for lowering the boom using gravity in total power failure.
Overrides function controls for emergency retrieval due to platform overload.
System providing a lanyard attachment point for external access.
Padding kit with limit switches to deactivate functions on contact.
System for lanyard attachment allowing access outside the platform.
Accessory for efficiently positioning panels with a platform tray.
Provides additional information for operator maintenance.
Lists key operating parameters and limitations of the machine.
Details daily maintenance tasks and lubrication specifications.
Procedure for testing the oscillating axle lockout system.
Information on tire and wheel specifications, maintenance, and replacement.
Information based on European Machinery Directive and noise/vibration levels.
To Next Page
