Need help?Do you have a question about the JLG TOUCAN 10E and is the answer not in the manual?
General| Platform Capacity | 200 kg |
|---|---|
| Overall Width | 0.99 m |
| Overall Height | 1.99 m |
| Power Source | Electric |
| Machine Width | 0.99 m |
| Gradeability | 25% |
| Voltage | 24V |
| Max Working Height | 10.1 m |
| Platform Height | 8.10 m |
| Weight | 2950 kg |
| Turning Radius (Inside) | 0.15 m |
Outlines necessary precautions for proper and safe machine operation and maintenance.
Details essential pre-operation checks, training, and knowledge for safe machine use.
Covers general operational guidelines and safety practices to prevent hazards.
Provides instructions for safely towing, lifting, and hauling the machine, including precautions.
Defines required operator training, supervision, and responsibilities for safe operation.
Details machine preparation, inspection schedules, and maintenance recommendations.
Describes procedures for verifying all machine functions are operational from control stations.
Details steps to check slack/broken chain indicators and interlocks for proper operation.
Provides general information needed to understand machine controls and their functions.
Details specific controls, switches, and indicators on the machine's panels.
Explains the controls and operation of the ground control panel for machine operation.
Details the controls and indicators found on the platform control station for operation.
Describes the machine's features, primary operator stations, and basic functions.
Covers capacities, stability, gradeability, and other operational limits.
Explains how to steer and drive the machine safely, including drive orientation.
Details the machine's warning lights and audible alarms and their meanings.
Explains the steps to be taken in case of an emergency situation during operation.
Details the procedure for notifying JLG Industries of any incident involving their product.
Provides procedures for emergency operation when the operator is unable to control the machine.
Lists key operating specifications, dimensions, and capacities for the machine models.
Outlines daily maintenance tasks that the operator should perform for the machine.
Provides guidance on battery maintenance, safety practices, and troubleshooting.
Covers inspection, replacement, and installation procedures for tires and wheels.
Details the procedure for verifying the tilt sensor's functionality and calibration.
Provides a reference for Diagnostic Trouble Codes (DTCs) for system troubleshooting.
Provides a log for recording machine inspections, repairs, dates, and comments.
To Next Page
