Operation
Read all instructions, warnings and safety procedures located in the
Safety
chapter
before using the bike.
HEART-RATE SENSORS
Hold the sensor plates on the handlebars ensuring that your hands are clean. A
heart- rate reading will show on the display. Factors that interfere with pulse signal are:
• Hand lotions, oils or body powder.
• Excessive dirt.
• Excessive movement.
NOTE: Heart-rate is calculated by PPM (Pulsations per minute).
DATA READOUTS
As you exercise, the bike keeps track of the following data:
• Time: The total time you have been working out or time remaining. Display time as
hours
:
minutes
.
• Speed: Your current speed, displayed in kilometres per hour (km/h).
• Distance: The total accumulated distance, in kilometres during your workout.
• Calories: The total accumulated calories burned during your workout.
• Heart-rate: Your current heart-rate. Heart-rate will appear when a pulse signal is
detected. Use the sensor plates on the handlebars to display your heart-rate.
• Odometer: The total accumulated distance, in kilometers since the bike has been
first used.
• Scan: Automatically scans through each mode in sequence every six seconds.
To Next Page
Loading...
Need help?
General
