To find the ideal location to set up this bike, ensure that:
• Area is well illuminated and well ventilated.
• Surface is level.
• There is enough space to access the unit and emergency dismount. If it is possible,
keep the following clearances: 0.5 m at each side and 2 m at the back.
• The bike is placed in an environment with a relative humidity range of 30-50%.
Please ensure the temperature is kept constant. Do not use in a moist or damp
environment as this may impact on the integrity and performance of the machine.
PREPARING SITE
DIAGRAM
Resistance Dial
Monitor
Rear Frame
Front Stabiliser
Front Frame
Back Rest
Rear Stabiliser
Pulse Plate Handlebars
Right Pedal
Saddle
Seat Frame
Left Pedal
Pop Pin Knob
To Next Page
Loading...
Need help?
General
