To Next Page

To Previous Page

Maintenance

Maintenance must be performed on a regular basis. Performing maintenance actions can

aid in providing safe and trouble-free operation of all JLL

equipment.

JLL

are not responsible for performing regular inspection and maintenance actions for

your machine. JLL

representatives are available to answer any questions that you may

have on +44 (0)800 6123 988.

PREVENTIVE MAINTENANCE ACTIVITIES

Every JLL

bike that comes from the factory is already maintained, however, you just

need to follow simple steps to keep it in fully working condition. Keeping the bike in a

clean state will help to prolong its life. Perform regular preventive maintenance to ensure

normal operation of the unit. Keep a log of all maintenance actions to assist in staying

current with all preventive maintenance activities. JLL

is not responsible for performing

regular inspection or maintenance.

Read all instructions and warnings listed both in this chapter and in the

Safety

chapter. During maintenance, disconnect the power cable. Contact JLL

Customer Service on +44 (0)800 6123 988 for any maintenance or service concerns.

Requirements:

• Water

• Dry cloth

• Vacuum

1. Only use water to clean and dust. Do not use any cleaning product because they

may damage the bike.

2. Be careful not to spill or get excessive moisture between the edge of the

monitor, as this might create an electrical hazard or cause failure of the

electronics.

WARNING

1. Use only JLL

replacement parts.

2. If you allow your machine to become rusty, this will affect your warranty.

WARNING

JLL RE100 User Manual

Other manuals for JLL RE100