14
Use the following instructions to test the full resistance of the bike and to check the
machine for proper operation.
1. Sit on the bike and start pedalling, change the levels of resistance and check to make
sure you feel a difference in difficulty.
2. As you are pedalling make sure you don’t feel any wobble in your machine.
3. As you pedal on your bike check that there are no unusual noises.
4. Finally check the monitor to make sure the digits are changing on each setting to
record your workout correctly.
TESTING THE BIKE OPERATION
SPECIFICATIONS
Display
Display: Scan Mode, Time, Speed, Distance, Calories, Odometer and
Pulse
Flywheel
5KG Two Way Flywheel
Pedals Adjustable toe straps
Resistance
8 Levels of magnetic resistance
Seat Adjustable seat with forwards and back movement
Handlebars Pulse plates built into the handlebars
Storage Transport wheels on the front stabiliser
Maximum User Weight
100kg, 15 St
Occupying Area 130 x 59.5 x 109cm
Packaging Dimensions 135cm (Length) x 35cm (Width) x 25cm (Height)
Gross Weight 38KG
Net Weight 34KG
To Next Page
Loading...
Need help?
General
