Important Information
Electro Magnetic Compatibility (EMC)
1. ElectroVita needs special precautions regarding EMC and needs to be installed and put
into service according to the EMC information provided in the
ACCOMPANYING DOCUMENTS.
2. Portable and mobile RF communications equipment can affect ElectroVita .
3. Warning that the use of accessories, transducers and cables other than those specified
with the exception of transducers and cables sold by the manufacturer of the ElectroFlex as
replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY of the
ElectroFlex.
4. Warning the ElectroVita should not be used adjacent to or stacked with other equipment.
Guidance and manufacturer’s declaration – electromagnetic emissions
The ElectroVita is intended for use in the electromagnetic environment specified below. The
customer or the user of the ElectroFlex should assure that it is used in such an environment.
Emissions Compliance Electromagnetic Environment Guidance
RF emissions CISPR 11 Group 1 The ElectroVita uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions CISPR 11 Class B The ElectroVita is suitable for use in all
establishments, including domestic
Harmonic emissions IEC 61000-3-2 CLASS A establishments and those directly connected to
the public low-voltage power supply network
Voltage
uctuations/ icker emissions IEC 61000-3-3 Complies that supplies buildings used for domestic
purposes.
18
To Next Page
Loading...
General