JMPosner SQ1 - Maintenance and Repair

12
CHANGING THE BEARING HOUSING SQ2 - SQ3
1. Placethebowlupsidedownontheatsurface.
2. TurntheAllenkeyanticlockwiseandremovethe3bolts,(allenkeysprovided)
3. Removetheoldhousingandplacebackintheboxthenewhousingwassentinand
returntoJMPosnerLTD.
4. Cleanthebasinthoroughly(removeanyGreaseorchocolate)
5. TakethenewHousingandMatchthehole“A”onthehousingtothe“A”markingon
theBasin.
6. Handtightenall3boltsrst.
7. WiththeAllenkeyturnclockwiseuntiltight.