1. The 5# massage bracket is fixed on the column with F# screw
M8*15 and G# flat pad M8, and then fixed with D# massage stand
with G# screw M8*45, I# flat pad M8 and H# anti-loose nut M8 On
the 6# massage stand.
2. Respectively, put the 8# sponge jacket on the round tube of the 6#
massage stand.
3. Fix the 7# massage head on the flat plate at the upper end of the
6# massage stand with its own screws, flat pad and elastic pad.
5. Electronic control operation
To Next Page
Loading...