EasyManua.ls Logo

JMQ A6X - Parameter Setting in 3 Modes; Other

JMQ A6X
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Parameter setting in 3 modes
a. The countdown time setting is initially 30:00 minutes, the setting
range is 5:00---90:00 minutes, and the step is 1:00.
b. The calorie setting of the calorie count is: 100 kcal, the setting
range is 20---990 kcal, step 10.
c. The initial distance of the countdown distance setting is 5
kilometers, the setting range is 0.5---99.0 kilometers, and the step is
0.1.
d. The cycle switching sequence is: manual, time, distance, calories
Other
When a countdown parameter is run, the display shows END, and a
0.5 second alarm every 2 seconds until the treadmill stops, then
stops the alarm and then returns to the manual mode
state.Countdown time, countdown calorie, and countdown distance
can only be set to one of them. Run the last setting, the set
parameters are counted down, and the other displays positive count.
Bluetooth music operates as follows:
Turn on the treadmill power switch, manually search for the
Bluetooth device (JF-BTMP3) with the mobile phone, find the