JNC SSF-110 - Page 25

③ ALARM PLAY : THE FILE SELECTED PLAYS BACK ON TIME WHEN IS SET UP IN ADVANCE.
(10PCS AVAILABLE)
(이하 설정은 TIMER REC와 동일합니다.)
IN CASE OF FM MODE, THE STATION WHICH IS SET IS ON AIR WITH BLINKING ALARM MARK.
- SETTING UP THE ALARM PLAY CAN BE DONE UNDER ALL MODES IS STOPPED EXCEPTING
“B-MARK” MODE.
- IF DO NOT SET UP “SET DATE”, IT WON’T EXACTLY WORK.
- IF YOU WANT TO SET UP THE PAST TIME, IT WON’T WORK.
- IF IT IS TIME FOR RESERVATION RECORDING IN ALARM PLAY, ALARM PLAY WILL BE STOPPED.
- ALARM PLAY IN OPERATING IS OPERATED FIRST THAN OTHER FUNCTIONS EXCEPTING
RECORDING.
※ SET UP THE ALARM PLAY
- THIS FUNCTION HAS DATE/DAILY/WEEKLY MODE.
1. DATE (1 TIME)
a. ENTER INTO DATE.
SET UP YEAR, MONTH, DAY BY PRESSING “REW/FF” FOR MOVING AND “MENU” OR
“PLAY/PAUSE” FOR SELECTION.
b. IF IT IS COMPLETED, AUTOMATICALLY DISPLAY TRANFERS TO TIME SETTING DISPLAY.
TIME SETTING IS SAME AS THE PROCEDURE OF DATE.
2. DAILY (PLAYBACK AT THE SAME TIME EVERYDAY)
a. ENTER INTO DAILY.
SET UP HOUR, MINUTE BY PRESSING “REW/FF” FOR MOVING AND “MENU” OR “PLAY/PAUSE”
FOR SELECTION.
3. WEEKLY (PLAYBACK AT THE SAME TIME PER WEEK)
a. ENTER INTO WEEKLY.
SET UP HOUR, MINUTE BY PRESSING “REW/FF” FOR MOVING AND “MENU” OR “PLAY/PAUSE”
FOR SELECTION AND THEN SET UP AS SAME AS PROCEDURE OF DAILY.
- AFTER COMPLETING, “ALARM” MARK WILL DISPLAY AND THEN IT WILL BE TRANSFERED TO
INITIAL DISPLAY AND BLINKING NO.2 OR THE CHANNEL WHICH DOES NOT SET.
YOU CAN SET UP TO SAME FILE UP TO 10.
IF YOU WANT DELETE THE CHANNEL SET, PRESS “ERASE” BUTTON ON THE CHANNEL SETTING
DISPLAY. “REW/FF” FOR YES/NO AND “PLAY/PAUSE” FOR SELECTION.
※ CAUTION
- IN ALARM PLAY, ONLY THE FILE WHICH IS SET PLAYS AND THEN STOPS.
25