Firmware Upgrade
THIS DEVICE HAS THE FEATURE WHICH IS TO IMPROVE FUNCTION AND CORRECT ERROR BY UPGRADING
FIRMWARE.
YOU CAN DOWNLOAD UPGRADE FILE BY CONNECTING TO WEBSITE.
• Before having Firmware upgrade, save the data in PC or other device. After this, start format of
DDR- 5100 by the channel of MENU/ SYSTEM/ FORMAT.
1) COPY THE FIRMWARE AT THE ROOT DIRECTORY IN THE SET.
2) REMOVE THE SET & TURN OFF.
3) WHEN TURN ON, IT WILL UPGRADING AUTOMATICALLY AS BELOW.
Firmware
Upgrading
00%
Upgrade
Completed
After completed upgrading, set turn off AND TURN ON automatically
☞ BEFORE UPGRADING, BATTERY STATUS MUST BE CHECK. IF THE STATUS IS LOW, CHANGE IT.
IT MIGHT CASUE SERIOUS PROBLEM TO THE SET.
46
To Next Page
Loading...
