To Next PageTo Next Page
Need help?Do you have a question about the jobmate 99-2973-8A and is the answer not in the manual?
Essential personal protective equipment requirements for operating the cordless drill safely.
Guidelines for safe electrical connection and operation of the power tool to prevent hazards.
Core principles for safe operation, including work area, electrical safety, and personal conduct.
Ensuring a clean, well-lit, and safe environment for tool operation, free from hazards.
Details on the tool's double-insulated plug and proper electrical connections for safety.
Guidelines for user alertness, dress code, and avoiding distractions during operation.
Instructions on proper handling, securing workpieces, using correct tools, and maintenance.
Guidelines for qualified personnel performing repairs and using correct replacement parts.
Precautions for safe handling, storage, and use of the battery and charger.
Explanation of the UL certification mark indicating compliance with Canadian and U.S. standards.
List of optional and included accessories for the cordless drill, with descriptions and quantities.
Details on what is included in the package and how to identify drill components.
Step-by-step guide on how to properly charge the battery pack using the provided charger.
Instructions on how to remove and insert the battery pack into the cordless drill for use.
Information on the integrated storage compartment for screwdriver bits on the drill.
Guide to adjusting the torque clutch settings for different screw sizes and materials.
Explanation of how to use the forward/reverse switch to control drill rotation direction.
Instructions on selecting between low and high-speed settings for optimal drilling and driving.
How to operate the variable speed trigger for controlled starting and speed adjustment.
Step-by-step instructions for securely inserting and tightening drill bits into the keyless chuck.
Procedure for safely removing drill bits from the keyless chuck after use.
How to use the built-in spirit level for accurate horizontal drilling.
Techniques for drilling into various surfaces, including using center punches and securing workpieces.
Instructions for selecting the correct bit and using the torque settings for driving screws.
Detailed steps for safely removing the drill chuck from the spindle.
Procedure to tighten a loose chuck on the spindle and ensure proper jaw function.
Guidelines for cleaning the tool's plastic parts using appropriate methods and materials.
Information regarding the lubrication of internal components and the need for further lubrication.
Instructions for properly recycling nickel-cadmium batteries to protect the environment.
Tips for caring for the nickel-cadmium battery pack to ensure optimal performance and longevity.
Procedure for periodic battery 'exercising' to restore capacity and overcome crystal formation.
General
