JOBO SNAPSCAN 5000 User Manual

-29-
6.3 USB Mode
After finished capture, user can download the stored images from internal memory or SD
card to PC by selecting USB mode. Press OK button when connect USB cable to PC,
SnapScan 5000 becomes a mass storage device. User can review or edit images once PC
detected the external storage device. Or just take out the SD card from device into PC
to read the images directly.
6.4 USB Mode: Status
Once user select USB mode, SnapScan 5000 becomes a mass storage device and then a
status icon shows on display, then user can find an external USB disk device from my
computer and review the images in internal memory or SD card with PC.
USBmode

JOBO SNAPSCAN 5000 Specifications

General

Brand	JOBO
Model	SNAPSCAN 5000
Category	Scanner
Language	English