1. The stabilizer can't stabilize or motors are powerless after booting.
Ensure that the smartphone has been mounted and balanced correctly on the stabilizer.
2. Vibration happens when using the stabilizer in normal way.
Default value of motor strength is a bit high so that the stabilizer can work properly in
portrait mode. If the smartphone is lighter in weight, there might be vibrations. If that
happens, connect the stabilizer with the App and adjust the rate of motor strength.
3. "No Stabilizer Found" or "Connection Fail" when trying to connect the stabilizer with
the App.
4. iPhone moves randomly when performing face tracking or object tracking.
(1) Go to the phone control center and make sure the screen rotation is unlocked.
(2) Restore default settings in the App.
DISCLAIMER
FAQ
Portrait Orientation Lock: Off
Any use for illegal purposes is prohibited. Users are responsible for properly using product.
The manufacturer assumes no liability for any risks related to or resulting from the debug and use of
this product (including the direct, indirect or third-party losses).
The manufacturer reserves the right to amend this manual and the terms and conditions of using the
product.
Firmware upgrades may cause changes in function descriptions in this user manual. Read the
instructions carefully before upgrading the firmware and use the corresponding user manual.
(1) Forget the stabilizer or cancel pairing in Bluetooth list of the smartphone. Close and
open phone's Bluetooth then search again the stabilizer.
(3) Reboot the smartphone if the problem persists.
If the stabilizer can't be found in the Bluetooth list, it may be connected with previously
paired phones. Turn off the Bluetooth of other phones and search again in the App.
(2)
12
To Next Page
Loading...
Need help?
General
Weight and Dimensions
