JOCCA 2145 - Basic Control

EN
13
English
-In standby mode, the screen is dark and consumes less power.
-If no function is active, an acoustic signal will be heard and after ve minutes the standby mode will
be activated and the screen will go dark.
BASIC CONTROL
1. Set the time.
-Adjust the duration of cooking or preparation by pressing the TIME button by pressing
the + or - buttons.
-The adjustable time ranges from 10 seconds to 99 minutes in 30-second intervals.
-3 seconds before the end of the time, the robot emits two beeps and then, once all the time has
elapsed, the control panel will ash and the appliance will stop
2. Adjust the temperature.
-Adjust the cooking or preparation temperature by pressing the TEMP button or pressing
the + or - buttons .
-The temperature ranges from the room temperature to 120 °C with intervals of 10ºC in 10ºC.
- As soon as you set a temperature higher than 60°C, the speed will automatically lock at the
maximum level of 4.
3. Adjust the speed.
- Adjust the speed of cooking or preparation by pressing the SPEED button or pressing
the + or - buttons.
- The speed setting ranges from 1 to 10.
- Speed from 1 to 4 for the buttery accessory (13)
- Speed from 1 to 4 for the blade cover accessory (14)
- Speed from 1 to 10 for the blade (4).
- The speed can be changed during operation of the appliance.
- The appliance will stop if the speed is changed to 0 during appliance operation. To continue, select
a speed and press the Start button.
IMPORTANT:
- There cannot be more than 1.5 L of liquid in the jug when speed 10 is selected
because the liquid could be projected out of the jug. For speed levels below 10, the jug
can hold a maximum of 2 L.
4. Scale.
-The integrated scale allows you to weigh exact amounts in grams up to 5 kg.
-The scale is easy to use and is ready to go if no operation is in progress.
-Press the WEIGHT button , the display will show 0-0,
after 5 seconds the display will show 0000, it is ready for use. Put the ingredient to be weighed into
the jar. The weight will be shown in grams on the screen.
-If you add another ingredient to the jar, its weight will add up. (unless you use the tare function)
-Press the WEIGHT button to deactivate the weight.
Tare function.
Tare allows you to reset the weight to zero after weighing the previous ingredient that is still in the
container.
-Follow the rst three stages of the previous point.
- Press the RESET button , the display will return to show 0-0,
and after 5 seconds it will be ready to weigh, showing 0000 on the display.
- Renew the operation as many times as necessary.
5. TURBO function.
-The TURBO function allows you to quickly select the maximum speed level for express use.