Jocel DW5A User Manual

Dishwasher Service Manual
Type:
DW5A/DW5B/DW5E/DW5F/DW5H/DW5AL/DW
5HL
Commonly Used Tools
For the sake of safe and efficient manipulation, you should prepare and learn to use the
following tools prior to servicing the dishwater:
Cross screwdriver,
Common screwdriver,
Torque spanner,
OTK caliper and universal meter.
Attention: never measure the resistance of live cord. Otherwise, you measuring device
may be damaged.
The trouble shooting
Problems Reasons Directions
The water supply is turned off Turn the water supply on
Inlet hose is bended
Put the hose in the right way
E1
The water pressure is too low Minimum water pressure of
0.03Mpa

Jocel DW5A Specifications

General

Type	Freestanding
Capacity	12 place settings
Number of programs	5
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	47 kg

Summary

The Trouble Shooting

E1

Troubleshooting for error code E1 related to water supply issues.

E2

Troubleshooting for error code E2 related to water valves, pumps, and electrical controls.

E3

Troubleshooting for error code E3 related to wiring, thermostats, heating elements, and controllers.

E4

Troubleshooting for error code E4 related to water valves, switches, and softener issues.

V. Power cord

Removal and replacement

Steps for removing and replacing the power cord.

VI. Removal of Outer Casing, Control Panel, Rear

Removal and replacement

Steps for removing and replacing the outer casing, control panel, and rear.

VII. Check Internal Connecting Wire

Removal and replacement

Steps for checking and replacing internal connecting wires.

VIII. Door Lock Assembly

Removal and replacement

Steps for removing and replacing the door lock assembly.

IX. Electrical controller

Removal and replacement

Steps for removing and replacing the electrical controller.

X. Protection Switch and Working Switch

Removal and replacement

Steps for checking and replacing protection and working switches.

XI. Inlet Valve

Removal and replacement

Steps for checking and replacing the inlet valve.

XII. Washing Pump Motor Assembly

Steps for the check

Procedures for checking the washing pump motor assembly.

Removal of Drainage Troubles

Procedures for addressing drainage issues.

XIII. Heating Element and Protective Thermostat

Removal and replacement

Steps for removing and replacing heating element and protective thermostat.

XIV. Overheat Thermostat

Removal and replacement

Steps for removing and replacing the overheat thermostat.

XV. Water Temperature Thermostat

Removal and replacement

Steps for removing and replacing the water temperature thermostat.