1. In waiting state and reminding state, press " " for three seconds, the LED display
will go off and set to energy-saving mode.
2. If no operation in10 minutes under waiting state, the LED display will go off and
go into energy-saving mode.
3. Under the energy-saving mode, press any key or rotate any knob can quit the
1. To use reservation function, clock must be set in advance. Then, in the way of setting
the clock, reserved time that oven starts to cook must be set (a> Press reservation
setting button " "; b> Rotate " K2 " to set the hour time of reservation. Time should
be within 0--23. c> Press reservation setting button " " again; d> Rotate " K2 " to
set minute time of reservation. Time should be within 0--59.), but don't press clock
this time. Next, turn knob " K1 " to choose function.
2. Press " " button to set cooking time and temperature. Then turn knob " K1 " to
adjust time, and " K2 " to adjust temperature.
3. Press the " " button to finish cooking setting, and the clock will be on the screen
with reservation sign " " always lighting. But no other function signals are
presented. Reservation time can be checked by pressing " ", 3 seconds later the
screen will show clock again.
4. At the time of reservation, cooking will start automatically after a buzzing sound. The
reservation symbol " " will put out, and other indicating signs will work normally.
- Lamp, defrost, probe can't be reserved.
- During the status of reservation, press cancel button once, time and temperature
of reservation menu will be shown with menu icon lighting constantly. Press again,
screen returns to clock, or press start button to return to reservation status.
- Reminder function is invalid during reservation status.
To Next Page
Loading...
