To ensure the oven shelves operate safely, correct placement of the shelves between
the side rail is imperative. Shelves and the pan only can be used between the first and
The Shelves should be used with the right direction, it will ensure that during careful
removal of the shelf or tray, hot food items should not slide out.
For replacement, process as follows:
1. Disconnect power from the mains outlet or
switch off the circuit breaker of the unit's mains
2. Unscrew the glass lamp cover by turning it
counter-clockwise (note, it may be stiff) and
replace the bulb with a new one of the same
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C
1. Fit oven into the cabinet recess.
2. Open the oven door and determine the location
of the mounting screw holes.
3. Fix the oven to the cabinet with two screws.
To Next Page
Loading...
