Jocel JP2EV010148 - Troubleshooting Common Issues; Technical Data

HINTS AND TIPS
Problem
Possible causes
What to do
The hob cannot Be
turned on.
No power.
Make sure the hob is connected to the power
supply and that it is switched on.
Check whether there is a power outage in
your home or area. If you’ve checked
everything and the problem persists, call a
qualified technician.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section ‘Using your
ceramic hob for instructions.
The touch controls are
difficult to operate.
There may be a slight film of water
over the controls or you may be using
the tip of your finger when touching the
controls.
Make sure the touch control area is dry and
use the ball of your finger when touching the
controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and smooth bases.
See ‘Choosing the right cookware’.
See ‘Care and cleaning’.
TECHNICAL SPECIFICATION
Installed Electric Power
Product Size H×W×D(mm)
Building-in Dimension A×B (mm)
2745W-3267W
52X288X590
512X275
Supply Voltage: 220-240V~50/60Hz
Note: Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
-49-