VC2 13
OUTPUTS
A single 1/4 inch jack socket provides high level balanced line output.
The two XLR output sockets are balanced low impedance, and are resistor
buffered from each other. The 'HIGH LEVEL' output is low impedance
balanced output at zero level. The 'LOW LEVEL' output is 200 ohm
impedance microphone level (-40dB).
Connections are;
• Pin 1 is ground or screen.
• Pin 2 is positive phase or 'hot'
• Pin 3 is negative phase (or ground for unbalanced).
Output balancing is achieved electronically and these outputs behave in a similar way
to transformers.
POWER
Mains input is 230/110V AC via the IEC socket. The socket has an integral fuse holder
with a spare fuse fitted. Rotation of the fuse holder selects alternative AC voltage.
To Next Page
Loading...
