VC2 15
INSERT.
• Push putton insert switch (and indicator)allows comparison of inserted outboard
equipment.
OUTPUTS
• XLR High level balanced 50 ohm +4dBu for 0VU (variable)
• Max. output unbalanced approx. +22dBu, balanced +26dBu.
• XLR Low level balanced 200 ohm -40dBu
• Insert, Tip and Ring jack socket. 400 ohm -10dBu output, 22K ohm input.
COMPRESSOR
• Photoresistive servo operated with 2 stage tube amplifier.
• Ratio 1 approx. 5 to 1 (ratio switch)
• Ratio 2 approx. 3 to 1
• Attack time 1mS min. 7mS max. (variable).
• Release time 200mS min 3S max. (variable).
ENHANCER
• Performance details not released.
POWER
• Approx. 15 Watts.
• IEC socket for power cable.
• Reversible fuse holder for 230VAC and 110VAC power input.
HOUSING
• 21) rack mounting totally enclosed steel case.
• depth approx. 350mm.
• weight 2.5Kgs.
WARRANTY.
In the unlikely case of a breakdown, please return the unit in its original packing through
the supplier. The unit will be attended to immediately and returned to your supplier. If
any breakdown occurs (excluding physical mistreatment) within 12 months of purchase
no charge will be made.
DECLARATION OF CONFORMITY.
This analogue audio processing equipment conforms to the standards and
requirements of the European Economic Community.
The EC Harmonised standards that have been applied are;
a) Electrical equipment (safety) Regulations 1994 (S.I. 1994/3260)
b) Electromagnetic Compatibility Directive (89/336/EEC) incorporating (S.I.
1992/2372)
1998 Distribution by JOEMEEK Distribution
Phone : +44 (0)1626 333948
Fax: +44 (0)1626 333157
To Next Page
Loading...
