What to do if Joerns Oxford Elara Medical Equipment lift starts and stops repeatedly?
If the lift starts and stops repeatedly, it might be due to exceeding the maximum safe working load. When this happens, the SWL overload protection activates, and an 'OVERLOAD' message appears on the LCD display screen.
What to do if Joerns Oxford Elara battery charge status symbol on the LCD display screen does not indicate FULL BATTERY symbol after overnight charge?
Check if the charger is properly connected to the mains supply and that the mains supply has power. Also, verify that the charge/status indicator is flashing green when the lift unit is on charge and in operating mode (not in sleep mode). If not, contact an authorized Joerns Healthcare service provider for inspection/servicing.
What to do if Joerns Oxford Elara Medical Equipment charge/status indicator is not flashing green when the lift is on charge?
Check if the charger is connected to the mains supply and ensure the mains supply has power. Inspect the fuse in the mains plug and replace it if necessary. If the issue persists, contact an authorized Joerns Healthcare service provider for inspection/repair.
What to do if directional operation is reversed on Joerns Medical Equipment?
Do not use the lift and contact an authorized Joerns Healthcare service provider to arrange service/ repair.
Provides vital information for safe and correct operation, maintenance, and features.
Defines the intended purpose and usage parameters of the Oxford Elara ceiling lift.
Instructions for inspecting and renewing the lifting tape before each use.
Details how to find equipment identification (serial number, model) on the unit.
Specifies the maximum safe working load for Oxford Elara models 227 and 284.
Key safety instructions for operating the ceiling lift safely.
Lists precautions and warnings related to patient suitability and safe operation.
Safety measures to prevent electric shock hazards related to the lift and charger.
Safety guidelines for using and handling batteries and the charger.
Provides a detailed illustration of the 4-way Elara lift unit components.
Explains On/Off switch, charge/status indicator, and hand controls.
Details activation and reset of Emergency Stop and Electrical Emergency Lower functions.
Covers operator display, alert warnings, and standby/sleep modes.
Overview of menu map, functions, and setup options for various settings.
Provides essential information and warnings regarding the lift's batteries.
Provides warnings and guidelines for safely charging the lift's batteries.
Outlines the recommended schedule for maintaining the lift's condition.
Lists daily and pre-use checks for the lift unit, spreader bar, and slings.
Details the mandatory procedures to perform before each use of the lift.
Guidelines for inspecting the lifting tape for wear and damage.
Lists general physical and performance specifications of the lift.
Details electrical specifications and compatible charger models.
Specifies environmental operating conditions such as temperature and humidity.
Details the lift's compliance with electromagnetic emission standards.
Provides guidance on electromagnetic immunity levels and environment.
Explains the meaning of various symbols used on the lift unit, charger, and peripherals.
General| Brand | Joerns |
|---|---|
| Model | Oxford Elara Series |
| Category | Medical Equipment |
| Language | English |
To Next Page